Testwork · UFR
Prove the value on your material
Mine-specific testwork validates the UFR against your orebody and circuit, and quantifies the recovery, cost and environmental case before any capital decision.
Why testwork
Generic figures do not de-risk a capital decision
Every orebody and circuit is different. Rather than publish generic percentages, AZTEC establishes the performance of the UFR on your material through onsite testwork.
The results validate the design parameters for your operation and feed the financial modelling used for feasibility and investment analysis, giving a measured basis for the decision rather than an estimate.
What testwork validates
The measures that shape the business case
Gold recovery
Additional gold recoverable from your as-arising tailings discharge, measured against current circuit performance.
Operating cost
Change in detox reagent consumption and the associated OPEX impact for your circuit.
Cyanide reduction
Reduction in free and WAD cyanide concentrations in the treated slurry, supporting ICMI-aligned management.
Process stability
Reactor behaviour across your range of slurry densities and operating conditions.
Design parameters
The engineering inputs needed to configure the UFR circuit for your plant.
Financial model inputs
Measured data to support feasibility and investment analysis.
The high-level process
What to expect
The exact scope is agreed with you and depends on your material and objectives, but the sequence below is how AZTEC normally runs a campaign.
Questionnaire and financial evaluation
You share throughput, tailings grade and operating costs. AZTEC runs a high-level financial assessment against a deliberately conservative assumed recovery of 10 to 15%, to establish whether there is enough economic potential to justify physical testwork.
Onsite pilot campaign
Where the economics are attractive, AZTEC deploys its mobile six-stage 2 L pilot UFR. A typical campaign runs continuously, 24 hours a day, for four to six days, with four AZTEC personnel covering day and night shifts.
Verifiable results
AZTEC works alongside your metallurgical team. Your team collects 25 L of as-arising tailings every three hours using the site's established sampling procedures, and feed and tails composites are collected each shift.
Results and financial modelling
Assays are compiled and used to build the feasibility and investment case for your operation, against your own cost base.
Engineering and integration
If you proceed, custom engineering configures the circuit for optimal integration with your plant.
6
stages
Of the 2 L mobile pilot UFR.
24/7
operation
Continuous through the campaign.
4
personnel
Two day shift, two night shift.
4
crates
The pilot rig ships as checked baggage on a normal airline booking.
Methodology and data integrity
Your laboratory, your ore, mine-specific results
The recovery improvements the UFR demonstrates can look significant, which is exactly why AZTEC does not ask you to take them on trust. Testwork is run on site, on your material, rather than in a laboratory or on vendor-generated results.
All solid, solution and carbon samples are submitted to the same laboratory your site already uses for routine metal accounting, so the results are generated independently of AZTEC and can be checked against your own reporting.
Request mine-specific testwork
Leave your contact details and we will be in touch to discuss your operation.